Digital Radiography System (DR)

Digital Radiography System (DR)

0 out of 5

  • Achieving low noise by noise canceling image processing circuit.
  • Low lag image by strengthen refresh function, suitable for during radiographic exposure.
  • Attached driver soft can provide excellent clean raw image, adopting real-time off-set, gain and defect corrections.
Category: Tag:
  • Description

Description

– Provide high sensitivity and resolution taking advantage of fine   structured Csl/Tl screen.
– Adopting reflection coating on Csl/Tl screen enables excellent   sensitivity.
  • Achieving low noise by noise canceling image processing circuit.
  • Low lag image by strengthen refresh function, suitable for during radiographic exposure.
  • Attached driver soft can provide excellent clean raw image, adopting real-time off-set, gain and defect corrections.
  • Excellent reliability by using Csl/Tl screen direct vapor deposition method.
  • Long product life achieved using unique water-proof method of Csl/Tl screen.
  • Structure simulation adopted improved endurance of this product from vibration/shocks during operation.

 

Conversion screenCsl:TI (direct vapor deposition) + reflective coating
TFTTFT array + Photo Diode (a-Si)
Effective area35 x 43 cm (14 x17 inch)
Effective pixel matrix2448 (H) x 2984 (V) (approx. 7.3 million pixels)
Pixel pitch143um
A/D conversion16 bits
Image output time3 seconds for full image
Cycle time (min./Std.)6 second (min.)/1minutes (Std)
9 second (with image lag reduction)
Mechanical size384 X 460 X 15 mm
Temperature range+10 to +35 centigrade (operation), -15 to +55 centigrade (storage)
Humidity10 to 80% (RH)
Weight (approx.)3 kG
Mechanical load150 kg over front panel.
100 kg on 40 mm dia.